Low temperature pretreatment agent 15
June 2, 2020
Printing Thickener 1110
June 2, 2020

One-bath agent ES-1

Category:
Description

Product Profile
One-bath agent ES, born from the combination of enzyme technology and chemical products, is mainly applied in the half-bleaching finish process of cotton yarn fabrics,and the ordinary weaving fabrics in the semi-bleaching process. It can substitute for traditional auxiliaries like sudium hydroxide and scouring agent. Es can remove the impurity, wax, sizing agent, and natural color contained in the fabrics. Imparts cleanning surface of fiber,and soft feeling. At the same time, it will increase the hydrphilic of fiber. and improve the color yield and levelness.

Properties
Appearance: Light blue to light green white particle
PH value (1% solution): 12

Special Features
1. Low dosage can rapidly hydrolyze the slurry and degrade the impurities such as fat, wax and cottonseed, and increase the whiteness.
2. Under the precondition of saving auxiliaries and energy, the treatment effect is equivalent to the traditional method, and the strength loss is significantly lower than the traditional method.
3. Combine the many steps of pre-processing.
4. This product is a low-foaming product.
Suggestion
Dosage: ES-1: 1.5-2g/L;
Procedure: load on the fabrics, add ES-1, raise the temperature to 40-50℃, add H2O2, raise the temperature to 90-100℃, run for 60min and then drain, →wash with hot water(60-70℃ for 15-20min), drain→ wash with cold water for 15-20min and then drain→ add water adjust pH value to 6-7 ( add deoxygen enzyme), add dyestuff.

Indication
As we can’t fully take into account every condition the product is used in, our customers have to apply their technique and products according to the corresponding conditions by trials. If it is used with other auxiliaries, we recommend to test first and make adjustment as necessary.
Our products are manufactured according to local safety standard, please refer to MSDS for details. If you need more information of our products, please contact our Technical Department.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “One-bath agent ES-1”

Your email address will not be published. Required fields are marked *